P-Met High-Tech Company Pvt. Ltd.

P-Met High-Tech Company Pvt. Ltd.

Gorwa, Vadodara, Gujarat
GST No. 24AABCP7136Q1Z0
TrustSEAL Verified
Call 0804896618979% Response Rate

Infrastructure & Facilities

Manufacturing Facility

Our state-of-the-art manufacturing facility is built taking into account all the necessary requirements of the chemical industry. Spread across a sprawling area of 10,000 square feet. Our sophisticated manufacturing facility is equipped with requisite machinery to formulate quality Dye Penetrant, Dye Penetrant Testing Chemicals, Magnesium Remover, Dye Check Developer in conformation with industrial requirements.
For more Information:Contact Us

Our Non-Destructive Testing Facility

We are Manufacturing, Exporting, Wholesaling and Retailing equipment used in liquid penetration and Liquid Penetrant Products Inspection System from the continuous automatic movement or hand-operated movement in bench size or large size.

Below mention is surface preparation for test specimen:
  • Surface should be free from foreign matter which prevents penetration
  • Dust and dirt can be removed using a piece of cloth
  • Rust, paint & wax must remove from the testing surface using wire brush
  • Grease and oil must remove from the surface using PMC Cleaner


Application of Penetrant:
  • The PMC penetrant is applied by dipping, spraying or brushing, keeping in mind that the surface areas are covered adequately. For penetration into defects, a 5 to 10 minutes time is sufficient (penetrant dwell time). Moreover, optimum period can be ascertained by trial only
  • Excess Penetrant must be removed from the Testing Surface using a piece of clean cloth or absorbent paper

Following are the methods of removing excess penetrant from test surface in special cases:

  • Use water spray if penetrant is water washable type
  • Use cloth or absorbent paper moistened with solvent if penetrant is solvent removable base
  • Use emulsifier for emulsifying penetrant and water spray if it is a post-emulsifying penetrant

Application of Developer:

  • It has to be applied as soon as possible, after removal of excess penetrant from the test surface

Following are the applications of a developer:
  • Wet developer should be used with color contrast penetrant
  • Wet or dry developer may be used with fluorescent penetrant
For more Information:Contact Us

Nuclear / Atomic Energy and Research

  • Bhabha Atomic Research Centre
  • Heavy Water Plants
  • Indira Gandhi Centre for Atomic Research
  • Nuclear Power Corporation
  • Nuclear Fuel Complex
For more Information:Contact Us

Our Infrastructure

Signboard Image
For more Information:Contact Us
Our Infrastructure

Reach Us
Hemal Mehta (Director)
P-Met High-Tech Company Pvt. Ltd.
1-5/6, Industrial State, Gorwa
Vadodara - 390016, Gujarat, India

Call Us

Send E-mail