P-Met High Tech Company Private Limited
P-Met High Tech Company Private Limited
Gorwa, Vadodara, Gujarat
SEND SMS
SEND EMAIL

Fluxes for Aluminum Alloys

Our product range includes a wide range of pmc cover flux, fluxes for aluminum grain refiner and pmc fluxes for aluminum alloys.

PMC Cover Flux

PMC Cover Flux
  • PMC Cover Flux
Get Best Quote
Approx. Price: Rs 20 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity500 Kilogram
Physical StatePowder
Packaging Size50 Kg
Packaging TypeBag
BrandPMC

PMC Cover Flux is an off-white, high grade exothermic drossing-off flux meant for crucible melting of ingots and clean scrap for sand and die casting. This flux is formulated to effectively control oxide formation and inclusion of non-metallic impurities, leaving a relatively metal-free dross. It minimizes the hydrogen pick-up and absorbs as well as collects metallic oxides formed during melting operation. This makes the poured metal free from oxide inclusions. During stirring/ rabbling of the flux into the surface of the melt, a glowing red, metal-free dross is generated.

How to Use:
  • Preheat the crucible to a red hot condition and charge carefully
  • When the charge has reached the pasty stage, sprinkle a part of the recommended PMC Cover Flux over the surface so that the flux completely covers the melt surface
  • Add the balance quantity of charge and add further quantity of flux to keep the flux cover intact and complete
  • Continue further melting until the crucible is fully charged
  • After degassing/ grain-refining treatment, sprinkle a further quantity of PMC Cover Flux and allow to stand for a few minutes
  • Adjust the temperature, if necessary
  • Rabble the flux into the surface of the melt to produce a glowing red metal-free dross
  • Skim of the dross, check the pouring temperature and cast immediately

 

Request
Callback
Yes! I am Interested

Fluxes For Aluminum Grain Refiner

Fluxes For Aluminum Grain Refiner
  • Fluxes For Aluminum Grain Refiner
Ask For Price
Product Price :Get Latest Price

Product Details:

Minimum Order Quantity10 Piece
MaterialAluminum
Physical State Granules
UsageIndustrial
BrandPMC

Molten aluminum alloys have a tendency to coarsen their Grain Refiner structure at a high temperature. The degassing operation also increases the grain size. The coarse grain structure is not desired in a high-quality casting because it is responsible for lowering the mechanical properties, the creation of localized unsoundness cracking during forging and increasing the tendency of hot tearing in the cast alloy. A fine grain structure can be achieved by the introduction of PMC Grain Refiner-1 which incorporates a combination of suitable grain refining elements.

Description:
PMC Grain Refiner - 1 is a white crystalline powder in tablet form. The grain refining action is based on the combined nucleating power of titanium and boron compounds on all aluminum alloys with the exception of high conductivity aluminum.

How to Use:
  • These instructions are given only for grain refining treatment. For other fluxing treatment, please refer to the corresponding PMC flux literature
  • Preheat the plungers and furnace tools which are suitably coated to avoid iron pick-up
  • Adjust furnace conditions to bring the metal temperature to approximately 750°C
  • When the pyrometer indicates that the temperature is falling, aside from a portion of the PMC Coverflux and plunge half of the recommended amount of PMC Grain Refiner - 1. The remaining amount of the PMC Grain Refiner-1 should be used after the reaction has subsided
  • Remove the plunger, when the turbulence in the melt ceases, keeping the protective layer of PMC Cover flux intact
  • The metal is now ready for further treatment prior to drossing off

Precautions:
  • Ensure that PMC Fluxes are kept in sealed condition in a dry hot place
  • Do not allow PMC Fluxes to be exposed to the atmosphere when not in use
Request
Callback
Yes! I am Interested

PMC Fluxes for Aluminum Alloys

PMC Fluxes for Aluminum Alloys
  • PMC Fluxes for Aluminum Alloys
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandPMC
Physical StateGranules
UsageIndustrial

We are offering PMC Fluxes for Aluminum Alloys to our clients.

Features:
  • These are most efficient in action, based on the sound formula and are scientifically blended. Proven by long practice
  • Reduce metal losses in slag and drosses
  • Protect the melt from contamination by furnace atmosphere and products of combustion
  • Reduce hydrogen pick-up and porosity to a minimum level
  • these are simple to use and safe to handle
  • The result is sound castings with improved physical properties
Request
Callback
Yes! I am Interested
X

Explore more products



Reach Us
Hemal Mehta (Director)
1-5/6, Industrial State, Gorwa
Vadodara- 390016, Gujarat, India



Call Us

Share Us

F GT L


Send E-mailSend SMS